MASK_04 – Duet

FourthĀ of MASK collectionĀ ā€“Ā Duet

Story

It’s a remedy mask for two people who hesitate to talk to each other. Separated from outside world with the mask, users sit with legs crossed, face to face, and communicate with each other through smiles. It’s for the eager ofĀ communicating without seeing each other’s face yetĀ still feeling the intimacy. In the virtual world, users are surrounded by huge monsters, who will help the remediation process.

Features

  • Two-people, foldable accordion origami mask
  • PortableĀ intimate space
  • Self-made surface mountedĀ circuit board as Muscle Sensor * 2
    • One for each users
    • For detecting the muscle on face. In this scenario, will be used to detect Zygomaticus major muscle, which is associated with smiling

 

Content Test

 

Fabrication Process

Small scale paper testing (Thank Origami master Uttam for the help!)Ā 

Then use mylar sheet forĀ the final material. Got an angel helper Gladys!

Test putting it on two people! Need to add paper in the bottom part to increaseĀ the distance between two users, allowing the space for sitting with legs crossed face to face comfortably

Experiment_06

— CODING —

Hand recognition

  • FINALLY working…
  • Work good with handfist šŸ™‚Ā recognition, very finicky with handopen šŸ™Ā  recognition

JSARToolkit

  • Won’t be used in my project. JustĀ procrastinated like crazy.
  • Issues to solve
    • Transform positionĀ from 2d to 3d
    • Recognition stability
    • Screenshot_2015-04-13-21-42-49

Continue reading

Muscle Sensor MASK version

For my final project in Circuit Design and Prototyping, I plan to make a customized muscle sensor (EMG) for my thesis MASK, and the idea is to use the data as a measurement of mask wearer’s nervousness, and try to cope with it with MASK (virtually and hopefully also physically).

Research

Breadboarding

This is theĀ first attempt to breadboard the muscle sensor, based on the design of the oneĀ onĀ Sparkfun and also the tutorials on instructables. Because I don’tĀ have the component, e.g. instrumentation amp, specific resistors, there are a lot of hacky moves, and IĀ needĀ sticker patch electrodes, 9v batteries*2,Ā and components to know if it’s working or notĀ :/

muscleSensorBB

Ā <– originally thinking to hook up two power supplies, but because it requires one’s positive connecting to another’s negative, I think I should ask Eric first to see if it’s safe to do that instead of using two batteries

 

Next steps

  1. Order components (Should I order both surface mount(for final) and through hole(for testing)?)
  2. Combine and adjust SpikeShield 2-Channel SpikerBox’ schematics, so having two inputs for microcontroller (using ATTINY)
  3. Design the shape and arrangement of the circuit to fit on the mask
  4. Qs to answer
    • What’s the power supply strategy to integrate microcontroller on the same board, with 9V for sensors and 3~5V for microcontroller?

 

Getting excited :DDD Lots of work and to be continued!

MASK_03 – Puppet

Third of MASK collectionĀ ā€“Ā Puppet

Story

It’s a puppet mask that speaks for you when you are not in the mood of socializing but still wanting to be nice. It also helps you to escape the real world, and provides temporary healthy self-pity for you to enjoy

Features

  • Nonverbal communication
  • TunnelĀ between real & virtual world
    • Deal with social behaviors for you
    • Take you exploring the 100% reality-unrelated world
      • Four Corners
        1. self pity zone
        2. so many escapees zone
        3. white noise zone
        4. connect to other masks

Content Test

onPuppet

Fabrication Process

UseĀ upholstery foam as paper. Trace the pattern on the foam and cut it.

Glue them with hot glue! Perfect match with foam. Thanks for the tips from awesome Jingwen!

So many hot glue sticks to make a head.

Body without hands and legs yet.

Waiting for elastic band to assembleĀ all together! (Look like a creepy baby)

 

MASK_02 – Hive

Second of MASK collection – Hive

 

Story

Itā€™s a community nest that connectĀ people to overcome the distance. During the day, you walk and work as a worker bee. During the night, you come back to the nest and share what you got

 

Features

  • Itā€™s a honeycomb mask
  • Two modes (switchable)
    1. Resting Mode:Ā User is virtually situated in one cell of the honeycomb
      • See and communicate with other people, just like a video conference
      • w/ Queen & BabyĀ larvae
    2. Working Mode: User is virtually in the air, outside the honeycomb
      • Not like in Resting Mode, the camera screen will follow the head, so the user can see and walk
      • w/ Worker

To do:

  1. Activities & interactions
    • Resting Mode – Since it’s about living as a community, what will a community usually do?
      • Vote
      • Self supply
      • Recycle
    • Working Mode – Like honeybee, workers go out to collect pollen etc
      • Activities of worker bee
        • gather pollen into the pollen baskets on their back legs
        • create wax for comb
        • feedĀ larvae
        • guard
      • Having a swarm of worker bees with you
        • assist you
        • protect you
        • accompany you
  2. When other people connect to the Hive, the certain cell of the mask will light up, otherwise in “breathing” mode

 

Content Test

Ā <– Worker Bee

 

Fabrication

leftover from laser cut

version 1

version 2 – mask

so many combs and mask of Frank! (Thank you Vicci!)