{ Brain } – process of painfully crafting your idea

SO. Here’s the report of my { brain } automata making process.

First, prototype with cardboard. Laser cut 11 pieces of pentagons, and stick them together with my favorite tool – duck tapes.
helmet

 

And endless steel wire bending.2014-11-23 22.56.04

 

Laser Cut transparent 3/16″ acrylic and build into dodecahedron  with hinges and machine screws.
2014-11-30 17.00.26

And mount the motor my pulley system!
pully_Motor

 

Things all sound easy but there are actually lot of painful struggling –>

  1. Pre drilling hole on small wood tube is hard. Crack easily.
  2. Rope has to be trimmed neatly or it will stuck with wires.
  3. Bad binding with wire and motor shaft. Asked magical Ben Light, ordered a shaft coupler to connect wire and DC motor.
  4. Have to relocation the motor. Should leave more space for the shaft side.
  5. Friction debugging nightmare…

SO. I’m really concerned about the possibility of finishing it before Final…. but whatever, I’ll keep working on it :DDDDD

 

1 Comments

Leave a Comment.